Brocade Communications Systems ICX 7250 series, Configuration Manual

Page: 230 / 483

FIGURE 22 Redistributing OSPF and static routes to RIP routes
Load sharing
Brocade devices can load share among up to eight equal-cost IP routes to a destination. By default, IP load sharing is enabled. The
default is 4 equal-cost paths but you can specify from 2 to 8 paths.
On the ICX 7750 device, the value range for the maximum number of load-sharing paths is from 2 through 32 ,which is controlled by
the
system-max max-ecmp command.
The device software can use the route information it learns through OSPF to determine the paths and costs.
Load sharing
Brocade FastIron Layer 3 Routing Configuration Guide
230 53-1003903-04