Brocade Communications Systems ICX 7250 series, Configuration Manual

Page: 108 / 483

Displaying IP configuration information and statistics
The following sections describe IP display options for Layer 3 switches and Layer 2 switches.
By default, the CLI displays network masks in classical IP address format (example: 255.255.255.0). You can change the displays to
prefix format (example: /18) on a Layer 3 switch or Layer 2 switch using the following CLI method.
NOTE
This option does not affect how information is displayed in the Web Management
Interface.
To enable CIDR format for displaying network masks, entering the following command at the global CONFIG level of the CLI.
device(config)# ip show-subnet-length
Changing the network mask display to prefix format
By default, the CLI displays network masks in classical IP address format (example: 255.255.255.0). You can change the displays to
prefix format (example: /18) on a Layer 3 switch or Layer 2 switch using the following CLI method.
NOTE
This option does not affect how information is displayed in the Web Management
Interface.
To enable CIDR format for displaying network masks, entering the following command at the global CONFIG level of the CLI.
device(config)# ip show-subnet-length
Syntax: [no] ip show-subnet-length
Displaying IP information - Layer 3 switches
You can display the following IP configuration information statistics on Layer 3 switches:
• Global IP parameter settings and IP access policies
• CPU utilization statistics
• IP interfaces
• ARP entries
• Static ARP entries
• IP forwarding cache
• IP route table
• IP traffic statistics
Displaying global IP configuration information
To display IP configuration information, enter the following command at any CLI level.
device# show ip
Global Settings
ttl: 64, arp-age: 10, bootp-relay-max-hops: 4
router-id : 10.95.11.128
enabled : UDP-Broadcast-Forwarding Source-Route Load-Sharing RARP OSPF VRRP-Extended VSRP
disabled: Route-Only Directed-Broadcast-Forwarding BGP4 IRDP Proxy-ARP RIP VRRP ICMP-Redirect
Displaying IP configuration information and statistics
Brocade FastIron Layer 3 Routing Configuration Guide
108 53-1003903-04