80
User Manual
BritePort 8120
20
Can I have multiple static IP addresses for BritePort 8120?
Yes. You should contact your DSL service provider for fees and details on how to
obtain more static IP addresses.
21
What should I do if I forgot my login information to access the Web-based
configuration tool of BritePort 8120?
Refer to the
Chapter 2: Hardware Installation
section of this User Manual, if you
forgot your login information, press the
RESET
button located on the backside of your
BritePort 8120. This will allow you to reset the username and password to the
manufacturing default values without changing the existing configurations. For the
default login information, refer to
Chapter 3: BritePort Setup Wizard
sections of this
User Manual.
22
How do I configure my BritePort 8120 to support multiple IP addresses?
For information, please refer to the
Chapter 3: BritePort Setup Wizard
and
Chapter 4:
BritePort Configuration Tool
section in this manual.
23
How do I configure my network computers for Static IP address?
In general, there are two scenarios when you need to set up your network computers for
Static IP address. The first is when you subcribe multiple Static IP addresses from
your DSL service provider and have each Static IP address being assigned to a
computer. The second is when your DSL network environment requires you to assign
each computer a specific internal IP address. In this section, we will provide
instruction based on the first scenario.
In Windows 95/98/Me,
1. Click
Start
->
Settings
->
Control Panel
to open the “Control Panel” window.
2. Double-click the
Network
icon to open the “Network” dialog box.
3. Click the
Configuration
tab, and from the list of “The following network
components are installed” select the
TCP/IP
with your Ethernet card, for example,
TCP/IP->Realtek RTL8139(A) PCI Fast Ethernet Adapter
. Then, click the
Properties
button to open the “TCP/IP Properties” dialgo box.
4. Click the
IP Address
tab to open the “IP address” dialog box. Select the option
Specify an IP address
and enter the
IP Address
and
Subnet Mask
provided by
your DSL service provider. Then, click the
Gateway
tab.
5. Enter the Gateway address provided by your DSL service provider in the
New
gateway
field, and click
Add
to add the new Gateway address.
Summary of Contents for BritePort 8120
