Broadxent BritePort 8120 User Manual Download | Manualshive

Page: 78 / 104

background image

76

User Manual

BritePort 8120

on the line must plug into low-pass filters (microfilters) to isolate them from the higher
ADSL frequencies.

3

What does a microfilter do?

A microfilter is installed in series with an analog device such as a telephone, fax
machine, answering machine, and analog modem. It filters the regular voice band
signals, i.e., the analog signals and blocks the higher frequency digital signals. Thus a
microfilter enables the user to use regular phone line for voice/fax without any
interference by the DSL signals. However, if your service provider has installed a
splitter, do not use microfilters.

4

Which operating systems does my BritePort 8120 support?

Broadxent, Inc. makes a wide range of DSL products. Before you purchase a DSL
product, you should always make sure that it supports the operating system on your
computer. For example, Broadxent BritePort 8120 supports Windows 95, Windows 98,
Windows Me, and Windows 2000 & XP.

5

Can I connect more than one computer to my BritePort 8120?

Yes. BitePort 8120 is equipped with 4 Ethernet Ports which allow you to directly
connect up to 4 PCs with NIC card installed. You can also connect BritePort’s
Ethernet port to a hub, and then connect more computers to the hub. Thus you can have
many computers sharing the same DSL line. To ensure that you can correctly
configure the BritePort 8120 to a more complex LAN environment, it is strongly
recommended that you consult your service provider technical support for details.

6

Can I connect multiple computers through a hub?

Yes, multiple computers can share the same DSL line. However, to connect a hub to
the Ethernet Port of BritePort 8120, you must use a crossed Ethernet cable. For the
assignment of IP addresses and configuration, you should talk to your service provider.

7

Can I connect a LAN to my BritePort 8100C?

Yes, you can connect your LAN to the Ethernet port of BritePort 8120. You should talk
to your service provider so that your DSL connection is configured accordingly.

«
...
76
77
78
79
80
...
»

Summary of Contents for BritePort 8120









































































































Reviews:

No comments

Related manuals for BritePort 8120

Brand: S&C Pages: 9

SMK Access Station Mini

Brand: Sigfox Pages: 17

Brand: Z-Wave Pages: 68

Brand: THOMSON Pages: 54

Brand: THOMSON Pages: 74

Brand: Luminext Pages: 8

Brand: Kasda Pages: 43

Brand: 2Wire Pages: 2

Brand: Perfectone Pages: 39

VSG1432-B101 Series

Brand: ZyXEL Communications Pages: 16

Brand: Telstra Pages: 25

Brand: Rosonix Technology Pages: 16

Brand: Owon Pages: 8

AMG1312-T Series

Brand: ZyXEL Communications Pages: 300

Brand: X-Trax Pages: 45

Brand: Weinzierl Pages: 10

Bridge/Router 3104s

Brand: Carrier Access Pages: 34

Brand: SmartRG Pages: 65

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands