Broadway Limited Paragon 2 Series Operator'S Manual Download

Page: 6 / 28

Broadway Limited Imports

Automatically Activated Sounds

Startup

The sound of a steam locomotive

starting is heard when the track

power is turned on.

Shutdown

The sound of a steam locomotive

being turned off is heard when track

power is lowered to about 5 volts.

Brake

Set

Plays automatically when the

locomotive shuts down.

Brake

Release

Plays automatically when the

locomotive starts up.

Brake

Squeal

Plays automatically when the

locomotive is slowed quickly.

Steam Chuff

The sound of steam chuffs is

automatically played when the

engine moves. The intensity of the

steam chuff is related to how hard

the engine is working. When the

engine is under a heavy load, the

chuff sound will be much sharper,

and the smoke output will increase.

When the load is reduced, the chuff

sound will be softer and the smoke

output reduced.

Randomly Activated Sounds

The following sounds will be heard when the locomotive

is running or sitting at idle. Various other random sounds

may play if appropriate for each locomotive.

Air Pump

Blower

Coal shovel or auger

Injector

Steam Cock

Blow Down

Pop-off Valve

Summary of Contents for Paragon 2 Series





























Search results

Summary of Contents for Paragon 2 Series

Reviews:

Related manuals for Paragon 2 Series

Brands by name

Popular brands

Broadway Limited Paragon 2 Series, Operator'S Manual

Search results

Summary of Contents for Paragon 2 Series

Reviews:

Related manuals for Paragon 2 Series

Brands by name

Popular brands