2
Broadway Limited Imports
Table of Contents:
DC Operation ..............................................................................3
DCC Operation ........................................................................ 10
DCC Programming Quick Reference & Tips ..................... 24
Throughout the manual we will use “DC” to refer to
operation using a traditional DC power supply and “DCC”
to refer to operation with a NMRA compliant Digital
Command Control system. Almost every operational
feature of this locomotive can be configured to suit your
personal taste by setting configuration variables (CV’s).
Many of these apply to DC and to DCC operation. See
the list of configuration variables in this manual and the
Paragon 2 Technical Reference Manual available at www.
broadway-limited.com for more information.
Connecting Locomotive and Tender
Before you can operate your new steam engine, you must
connect the locomotive and tender. First, locate the short
“tether” cable protruding from the front of the tender.
Next, locate the matching socket located under the cab
on the rear of your locomotive. Notice whether the pins
are located at the top or bottom of the socket. Also
notice the location of the holes on the end of the tether
cable. Using your finger, small pliers, or tweezers, firmly
insert the tether cable into the socket on the rear of your
locomotive. If you do not insert this completely, you will
have continuous problems with intermittent power pick-
up. If your locomotive is making sound, but is not moving,
your tether cable is not firmly seated in the socket.
insert tether image
here
