Broadconnect IP Office 1408 User Manual Download Page 94

Page: 94 / 188

1408, 1416 Phone User Guide

Page 94

15-601040 Issue 06a (25 October 2011)

IP Office

15.1.1 Follow Me To (Features Menu)

Using the user menu you can set and clear follow me to settings.

1. Press the Features soft key if shown.

To access the menu during a call, press the right arrow key or press the

PHONE key and then press

the Features soft key.

2. Use the

up and down

arrow keys to scroll the menu to Forward.

3. Press the Select soft key or the right arrow key.

4. Press the Select soft key or the right arrow key. If you already has a follow me to number set, the display below

is skipped.

5. Dial the number of another user. When it matches a user their name is displayed. Alternatively use the Dir soft key

select a user from the directory

Save
Save the selected number as your follow me to destination. All calls to your extension number will be
redirected to that destination.

Clear
Clear the currently selected or set number.

Back
Go back to the previous menu.

Access Control

The system administrator is able to configure whether you can access the Forward and Follow Me menu and status
options.

15.1.2 Follow Me (Status Menu)

If you have set a follow me destination for calls to your phone, you can clear or change the setting through the Status
menu.

1. Press the Status soft key if shown. To access the status menu during a call, press the

PHONE key and then

press the Status soft key if shown.

2. Use the

up and down

arrow keys to scroll the menu to Follow Me To.

To clear the follow me to setting, press the Clear soft key.

To change the destination of the setting, press the Edit soft key.

Access Control

The system administrator is able to configure whether you can access the Forward and Follow Me menu and status
options.

Summary of Contents for IP Office 1408





























































































































































































Search results

Summary of Contents for IP Office 1408

Reviews:

Related manuals for IP Office 1408

Brands by name

Popular brands

Broadconnect IP Office 1408, User Manual

Search results

Summary of Contents for IP Office 1408

Reviews:

Related manuals for IP Office 1408

Brands by name

Popular brands