Broadconnect IP Office 1408 User Manual Download Page 138

Page: 138 / 188

1408, 1416 Phone User Guide

Page 138

15-601040 Issue 06a (25 October 2011)

IP Office

18.8.6 Display Name

You can select what information is displayed on the top line of the phone display when the phone is idle.

Normal idle phone display showing

extension number, time and date.

Optional idle phone display showing

extension number and name.

1. Press the Features soft key if shown.

To access the menu during a call, press the right arrow key or press the

PHONE key and then press

the Features soft key.

2. Use the

up and down

arrow keys to scroll the display to the option Phone User.

3. Press the Select soft key or the OK button or the right arrow key.

4. Use the

up and down

arrow keys to scroll the display to the option Phone Screen Settings.

5. Press the Select soft key or the OK button or the right arrow key.

4. Use the

up and down

arrow keys to scroll the display to the option Display Name.

5. Press the Change soft key to change the setting or use the left or right arrow keys.

Off
Display your extension number and the date and time on the phone when it is idle.

On
Display your extension number and name on the phone when it is idle.

6. Press the Done soft key.

18.8.7 A-Menu Auto Exit

The Show Phone Screen option only applies to the A-menu screens accessed when you press the

key. If the option is

on, if you receive a call while in the A-menu, the phone will automatically exit the menus and display the call details.

1. Press the

MENU button.

2. Use the

up and down

arrow keys to locate the option Call Settings....

3. Press the Select soft key.

4. Use the

up and down

arrow keys to locate the option Show Phone Screen.

5. Use the left and right arrow keys or press the On/Off soft key to change the setting.

6. When completed, press the Done soft key.

7. Press the Exit soft key to exit the menus.

Summary of Contents for IP Office 1408





























































































































































































Search results

Summary of Contents for IP Office 1408

Reviews:

Related manuals for IP Office 1408

Brands by name

Popular brands

Broadconnect IP Office 1408, User Manual

Search results

Summary of Contents for IP Office 1408

Reviews:

Related manuals for IP Office 1408

Brands by name

Popular brands