Broadconnect IP Office 1408 User Manual Download Page 83

Page: 83 / 188

1408, 1416 Phone User Guide

Page 83

15-601040 Issue 06a (25 October 2011)

IP Office

Voicemail: Email Mode

13.6 Changing Your Voicemail Code

1. Press the

MESSAGES button.

Depending on how your system is configured, you may be required to enter your voicemail password and then
press the Done soft key.

2. The visual voice menu is displayed.

3. Use the

up and down

arrow keys to scroll to the option Password.

4. Press the Select soft key or OK.

5. Enter your current password and press Done.

6. Enter the new password that you want to use.

The new password must be at least 4 digits long.

A series of numbers (for example 1234) or repeated numbers are not allowed.

7. Press Done.

13.7 Voicemail On/Off

You can control whether the telephone system uses voicemail to answer your unanswered calls. This does not switch off
your mailbox which you can still access to play existing messages and use other functions.

1. Press the

MESSAGES button.

Depending on how your system is configured, you may be required to enter your voicemail password and then
press the Done soft key.

2. The visual voice menu is displayed.

3. Use the

up and down

arrow keys to scroll the display to the option Voicemail.

4. Press the Select soft key.

5. Press the On or Off soft key to change the setting.

Summary of Contents for IP Office 1408





























































































































































































Search results

Summary of Contents for IP Office 1408

Reviews:

Related manuals for IP Office 1408

Brands by name

Popular brands

Broadconnect IP Office 1408, User Manual

Search results

Summary of Contents for IP Office 1408

Reviews:

Related manuals for IP Office 1408

Brands by name

Popular brands