manualshive.com logo in svg

Broadcom NetXtreme BCM57 Series, User Manual

Share
Download
Broadcom NetXtreme BCM57 Series User Manual Download Page 155

iSCSI Protocol and Broadcom Boot Agent Software

NetXtreme 

User Guide

 

Broadcom

®

 

April 2017 • 2CS57XX-CDUM514-R

Page 155

3.

Use the UP ARROW and DOWN ARROW keys to move to the Boot Protocol menu item. Then use the 
RIGHT ARROW or LEFT ARROW key to select the boot protocol of choice if other boot protocols besides 
Preboot Execution Environment (PXE) are available. If available, other boot protocols include Remote 
Program Load (RPL) and Bootstrap Protocol (BOOTP). 

4.

Use the UP ARROW, DOWN ARROW, LEFT ARROW, and RIGHT ARROW keys to move to and change 
the values for other menu items, as desired. 

5.

Press 

F4

 to save your settings. 

6.

Press 

ESC

 when you are finished. 

Using UEFI

1.

Restart your system.

2.

Enter the System Setup or Device Setting configuration menu.

3.

Select the device on which you want to change MBA settings.

4.

Select 

MBA Configuration Menu

.

Note: 

For some, but not all, iSCSI boot-capable LOMs, the boot protocol is set via the BIOS. See your 

system documentation for more information.

Note: 

If you have multiple adapters in your system and you are unsure which adapter you are 

configuring, press 

CTRL+F6

, which causes the port LEDs on the adapter to start blinking.

Summary of Contents for NetXtreme BCM57 Series















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands