manualshive.com logo in svg

Broadcom NetXtreme BCM57 Series, User Manual

Share
Download
Broadcom NetXtreme BCM57 Series User Manual Download Page 10

Installing the Hardware

NetXtreme 

User Guide

 

Broadcom

®

 

April 2017 • 2CS57XX-CDUM514-R

Page 10

Section 1: Installing the Hardware 

•

Safety Precautions

•

Preinstallation Checklist

•

Installing the Adapter

•

Connecting the Network Cables

Safety Precautions

• Remove any metallic objects or jewelry from your hands and wrists. 
• Make sure to use only insulated or non-conducting tools. 
• Verify that the system is powered OFF and unplugged before you touch internal components. 
• Install or remove adapters in a static-free environment. The use of a properly grounded wrist strap or other 

personal antistatic devices and an antistatic mat is strongly recommended. 

Note: 

This section applies only to add-in NIC models of Broadcom NetXtreme Gigabit Ethernet 

adapters.

Caution! 

The adapter is being installed in a system that operates with voltages that can be lethal. 

Before you remove the cover of your system, you must observe the following precautions to protect 
yourself and to prevent damage to the system components: 

Summary of Contents for NetXtreme BCM57 Series















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands