- 99 -
Check the flatness of cylinder surface.
Allowable limit: 0. 05mm
Measure connecting rod small end ID.
Allowable limit:
Φ14.067mm
Installation
。
Install locating pin.
Apply engine oil on the piston rings and pistons, and
install the piston rings at their positions with the
marking face upward.
Attentions:
Do not scratch the piston and do not break the piston
ring.
After the piston ring is installed, the piston ring is capable to rotate within the piston slot freely.
Clear all of gaskets attached on the crankcase.
Attentions:
Any foreign matter shall not fall into the
crankcase.
Install piston, piston pin and its retaining ring.
连杆小端内径
测试规
直尺
气缸
顶环
第二环
油环
KS MOTORCYCLES - http://ksmotorcycles.com