65
Align the groove on the flywheel with the fixed key on the shaft
*
Note
If the inner face of the flywheel is magnetic, make sure no any bolt
Fix the flywheel using a universal
non-adjustable spanner and then tighten the
locknut.
Torque value: 9.0 N·m
Install the left rear cover.
VI
Ignition System
Service Data-----------------------6.1
Ignition Coil---------------------6.4
Fault Diagnosis--------------------6.2
Trigger----------------------------6.5
Ignition System Inspection-------6.3
6.1 Service Data
Precautions on operation
1. Ignition system inspection: please perform inspection in accordance with the sequence listed in
the fault diagnosis table.
2. The ignition system is solidified in the ECU assembly, so ignition time adjustment is
unnecessary.
3. Ignition system inspection: please perform inspection in accordance with the sequence listed in
the fault diagnosis table.
4. Ignition system ECU shall not be dropped and hung, or heavily knocked (this is also the main
reason for its failure). Pay special attention to this while removing it.
5. Most of the ignition system problems are due to poor contact of sockets. Please check first if
parts of the connector are well contacted.
6. Check if heat value of spark plug is proper. Improper spark plug may result in unsmooth engine
running or burnt of spark plug.
KS MOTORCYCLES - http://ksmotorcycles.com
