60
Unstable power
Wiring of battery is poorly contacted.
Discharging system is of poor contact.
Lighting system is of poor contact or short circuit.
Failure of charging system
Wire connector is of poor contact, short circuit or short line
Defective voltage and current regulator
Failure of generator
5.3 Battery
5.3.1 Battery Removal
Open the right side cover.
Disconnect the battery negative lead wire first and then
the positive lead wire.
Take out the battery.
Warning!
During positive lead wire disconnection, be
sure to prevent the tools being used from
touching the frame; or it will result in short
circuit sparks, which may ignite gasoline
and damage battery. It is dangerous!
Install the battery in the reverse order of removal.
* Attentions
To avoid short circuit, please connect
positive lead wire first and then the
negative lead wire.
Battery charging (open-circuit voltage) inspection
Open the seat cushion.
Open the top cover of air cleaner and disconnect lead wire
of the battery connector.
Measure voltage between terminals of the battery.
Fully charged: 13.5V
Undercharged: 12.3V (battery stop working for 1 hour)
* Attentions
| A voltmeter shall be employed to check
KS MOTORCYCLES - http://ksmotorcycles.com
