Specifications subject to change without notice. © 2013 Brivis Climate Systems Pty Ltd
25
USER OPERATING GUIDE
1.0 INTRODUCTION
Congratulations on your purchase of a Brivis ICE Add-On cooling split system. To achieve the performance and efficiency
expected from your new ICE system, please ensure the Installer is a qualified tradesperson, that the Installer has
commissioned the unit and instructed you on its operation. Please also take the time to read the contents of this manual,
register your product warranty and retain this document for future reference.
WARNING
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been give supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure they do not play with the appliance.
•
Do not place articles on or against this appliance
•
Do not use or store flammable materials near this appliance
•
Do not spray aerosols in the vicinity of this appliance while it is in operation
•
Do not modify this appliance
1.1 Privacy Notification
Brivis Climate Systems Pty Ltd is the registered owner of the Brivis brand. Brivis will collect "personal information’’ from you
when you complete your warranty and maintenance registration form. This personal information is collected under the
guidance of the Privacy Information Protection Act 1998. The purpose of collecting this information is to:
•
Process your request for us to provide service activities for you
•
Register your purchase of equipment for warranty
•
Register your request for a survey/quotation for Heating Ventilation Air Conditioning goods and services
The intended recipients of the information are:
•
Employees of Brivis
•
Federal and State Governments who may require the information for administration purposes
While the supply of the information by you is voluntary, if you cannot provide or do not wish to provide the information
sought, Brivis may not be able to provide the services you request. If you have already provided information but have
changed your mind and do not want the information used, you may make application for access or amendment for that
information not to be used.
You have a right of access to, and correction of, the information concerning yourself in accordance with the relevant
procedures under the Act.
Enquiries concerning this matter can be addressed to the Business Practices Officer of Brivis, who can be contacted on
1300 BRIVIS.
1.2 How does your ICE system work?
When the ICE system is operating, the outdoor unit blows hot air out resulting in cooled liquid refrigerant entering the indoor
coil unit. This cooled liquid refrigerant expands into the indoor coil by the means of expansion orifice plates fitted on the
indoor coil cabinet. The expanded refrigerant temperature drops significantly and cools down the entire indoor coil. Then
the heater fan blows the air from your home through the ICE coil cooling and de-humidifying it. The movement of this
cooled air through your home will draw the heat from the house, so be sure that doors or windows are fully closed.
Whenever possible start the unit early to prevent the build up of heat within the house. The amount of cooling available from
any type of ICE system is dependent on the outside weather conditions.
Your Installer will have determined the system’s design conditions, zoning configuration (if applicable), and capabilities.
Should you require more information, please consult your Installer.
1.3 Operating your Brivis Networker Wall Control (if applicable)
The Brivis Networker wall control operates the complete Heating and cooling system, communicating key information and
sensing the temperature. It is an important part of the unit and its operation has been well explained in heater manual. The
following text explains how to switch into the cooling mode, for more details please refer to your heater manual.
