background image

1

Introduction

Congratulations on your purchase of a Brivis Cooling system.  For you to achieve the performance and efficiency
expected  from  your  new  cooler,  please  ensure  the  installer  is  a  qualified  trades  person,  that  the  installer  has
commissioned the unit before you commence operating, and you take the time to read the contents of this manual.  

In some Australian States it is mandatory that your cooler installation is issued with a certificate of compliance to 
guarantee  the  installation  workmanship.  Please  check  with  your  installer  or  the  local  plumbing  authority  or 
association. The Brivis cooler is covered by the product warranty as outlined in this manual.

Brivis products are renowned for providing years of trouble free performance. However, that doesn’t mean that they
will operate at their peak for all of that time without some attention.  To be at their most efficient they, like most things,
need a little care. So, to ensure that every Brivis unit is always in perfect condition, we have established the Brivis
Care Program for our valued customers.

The  Brivis  Care  Program  provides  you  with  a  maintenance  service.  This  service  includes  cleaning  the  unit  and 
ensuring that the system is operating at maximum efficiency. Not only does this guarantee peak performance, it also
allows any minor problems to be detected early. This ensures that the system will always be ready when you need it.

Privacy Notification

Brivis Climate Systems Pty Ltd is the registered owner of the Brivis brand. Brivis will collect “personal information’’
from you when you complete your warranty and maintenance registration form. This personal information is collected
under the guidance of the Privacy Information Protection Act 1998. The purpose of collecting this information is to:

• Process your request for us to provide service activities for you;
• Register your purchase of equipment for warranty;
• Register your request for a survey/quotation for Heating Ventilation Air Conditioning goods and services. 

The intended recipients of the information are:

• Employees of Brivis.
• Federal and State Governments who may require the information for administration purposes.

While  the  supply  of  the  information  by  you  is  voluntary,  if  you  cannot  provide  or  do  not  wish  to  provide  the
information  sought,  Brivis  may  not  be  able  to  provide  the  services  you  request.  If  you  have  already  provided
information  but  have  changed  your  mind  and  do  not  want  the  information  used,  you  may  make  application  for
access or amendment for that information not to be used. 

You have a right of access to, and correction of, the information concerning yourself in accordance with the relevant
procedures under the Act. 

Enquiries concerning this matter can be addressed to the Business Practices Officer of Brivis, who can be contacted
on 1300 BRIVIS.

How does your evaporative cooling work?

The amount of cooling available from any type of cooling system is dependent on the outside weather conditions.
Your evaporative cooler works best on hot, dry days. It is essential to provide the required amount of ventilation (for
your evaporative cooling system to function properly) by opening windows/doors whenever the cooler is operating.
Air is drawn  in through the filter pads resulting in 100% fresh cool air entering the home.  The movement of this
cooled air through your home will draw the heat out of the house, so be sure that doors or windows are open to
expel this heat to outside. Whenever possible start the cooler early to prevent the build up of heat within the house,
and on sultry or humid days your cooler may work better with the fan ONLY running and the pump turned OFF. Stale
air, cigarette smoke and fumes can be quickly cleared and replaced with fresh air by turning the fan to manual mode.

Before operating your Brivis Evaporative Cooler

Make sure enough window and/or door area is open for the unit to work correctly. The following table gives a guide
to the amount of open area required for each model in m

2

, and also gives suggestions on how to provide this.

This  appliance  is  not  intended  for  use  by  persons  (including  children)  with  reduced  physical,  sensory  or  mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

CAAB022832O Cool Owners ISSUE D_021073O  24/08/15  10:21 AM  Page 3

Summary of Contents for AD56

























Reviews: