14
Troubleshooting continued
Problem
Action
The unit will not turn on
Check the circuit breaker has not been tripped - if so reset it.
Reset the Cooler at the power supply.
The unit is blowing warm air
Check the water supply tap is turned on at the unit.
Check the pump has been selected on the wall control.
An error message is appearing
Refer to the section on ‘Coded Messages’ and follow the checks.
on the Brivis Networker
Check the power point is plugged in and turned on to the Cooler.
The Brivis Networker display
Check there is power to the power point with another appliance.
is blank
Check the circuit breaker has not been tripped - if so reset it.
The unit is not cooling very well
Check the water supply tap is turned on at the Cooler. Check the pump has
been selected on the wall control. Check sufficient door and/or windows have
been opened. Refer to Exhaust section.
There is no air coming
Contact our service department to place a service call.
out of some vents
There is moisture on my tiles
Check the vents are directing air flow across the ceiling and not towards
the floor. If it is humid turn the pump off. Check sufficient door and/or windows
have been opened. Refer to Exhaust section.
The padlock is appearing
This indicates that the child proof lock has been activated.
on the screen
Refer to the section on ‘Unlocking the Brivis Networker’.
For Your Records
Model Number:
Serial Number:
Install Date:
Installed by:
Installer Contact:
Service Records
To arrange a visit from one of our certified technicians please contact the Brivis Service department on 1300 BRIVIS
Service Provider:
Contact Number:
Service Year 2
Service Date: / /
Service Year 4
Service Date: / /
Service Year 6
Service Date: / /
Service Year 8
Service Date: / /
Service Year 10
Service Date: / /
CAAB022832O Cool Owners ISSUE D_021073O 24/08/15 10:21 AM Page 16
