On/Off
Button
Zone Keys
(only where
multiple Coolers
are installed)
Fan Symbol
Set Comfort
Level Indicator
Rotary Dial
Function
Button
5
Automatic Pre-Wet
When the Cooler is turned ON, with both the fan and the pump in either Auto or Manual mode, the Cooler will start
a Pre-Wet automatically. The Pre-Wet stage ensures the pads are thoroughly wet before the fan starts. This prevents
warm air being initially blown into your home and contributes to the effective operation and performance of the
Cooler. The Pre-Wet time will vary depending on how long the Cooler has been OFF, and whether it needs to fill the
tank prior to operation. During the Pre-Wet the message “Pre-Wetting cooler pads - Please Wait!” will scroll across
the top of the display.
Automatic Operation
In Auto mode the Brivis Networker automatically turns the pump ON or OFF as required and varies the fan speed
to maintain your selected “comfort level.”
To run the unit in Auto mode, just follow these easy steps:
• Turn the Brivis Networker on using the ON/OFF button.
• Press the Auto key until “Auto” appears on the screen.
• Rotate the round dial to set the comfort level you desire (up to have a cooler comfort level and down to have a
warmer comfort level).
Benefits of using Brivis coolers in Auto mode
in preference to Manual mode
• Power and water consumption varies in relation to the chosen comfort level. This comfort level cannot be as
easily maintained in Manual mode.
• In Auto Mode the unit operates only when it is required.
• Enables a set comfort level to be maintained automatically as the outside / inside temperature
conditions change.
• It allows you to pre-set the cooler to turn ON early and not let the house build up heat.
• The outlet airflow noise is kept to a minimum, as the fan speed is only as fast as required to maintain the set
comfort level. This slower speed also results in more efficient saturation of the Cooler filter pads, and a cooler
outlet air temperature.
Note:
It will take approximately 8 minutes for the Cooler to complete the pre-wet before the fan will turn on. The
next time you return to “Auto” these steps will not be necessary because the Brivis Networker remembers your
previous settings.
CAAB022832O Cool Owners ISSUE D_021073O 24/08/15 10:21 AM Page 7
