Instructions for Installation & Use
- Series No. JS8A/2010
16
HOW TO SETUP
STEPS IN CHANGING SHOULDER STRAP SLOTS
A.
Remove the restraint from vehicle.
B.
At the rear of the restraint, remove one of the harness shoulder
straps from metal Strap Connector by slipping strap through open
slot. The metal Strap Connector is shown in diagram right.
C.
From the front, pull the shoulder strap out through shoulder slot.
D.
Insert shoulder strap through restraint slot which will position
shoulder strap level with or above the child’s shoulder, shown above.
Ensure that the shoulder strap passes through matching slots in cover
and restraint body.
E.
Ensure there are no twists in the harness strap and the buckle
tongues face the correct way.
F.
Connect shoulder strap to metal strap connector at rear of restraint.
G.
Repeat for other shoulder strap. It is better to change one strap at a
time so that the other strap will be a guide for re-assembly.
Strap Connector
Do not use the restraint with harness shoulder straps set at
different heights or fed through mismatching slots. Ensure
harness straps are not twisted and that all straps are
secure by pulling each harness strap.
IMPORTANT :
FORWARD FACING
WITH BUILT-IN HARNESS
