Instructions for Installation & Use
- Series No. JS8A/2010
HOW TO INSTALL WITH A CHILD HARNESS
51
BOOSTER MODE
WITH CHILD HARNE
SS
G.
Finally, roll up the free end of the adjuster strap,
secure using the storage strap, then place it into
the top of the adjuster cover as shown right.
F
Fold the
adjuster strap
and secure
with storage
strap
F.
With the lap belt (or converted lap/sash) adjusted to
be a firm fit on the child's thighs, then adjust the child
harness to remove slack in the shoulder straps. Pull
the adjuster strap (C) to remove slack.
Once adjusted, further adjustments are necessary only
to the upper extension straps and to accommodate the
growth of the child.
Press (A) and pull the shoulder strap (B) to lengthen.
Adjuster Cover
Storage Strap
Fully press adjuster button
(A) while pulling the Upper
Anchorage Strap (B) to lengthen.
B
C
A
Adjuster
Pull Adjuster
strap to
remove
slack
The lap portion of the belt must be adjusted firmly first, and then the harness, so that the belt is
not lifted off the child's lap when the harness is adjusted.
CAUTION:
NOTE:
The shoulder straps must be in the slots which
are nearest to the child’s shoulders but no lower than
the child’s shoulders. This is achieved with the headrest
slightly above the child’s shoulders.
