Instructions for Installation & Use
- Series No. JS8A/2010
64
With Built-in Harness
1.
Ensure seatbelt is fitted to the seat and is tight.
2.
Ensure upper anchorage strap is attached to the car's anchor fitting and slack is removed.
3.
Ensure the built-in harness is fitted firmly to the child. A loose harness is dangerous.
As a Booster Seat
1.
Ensure seatbelt is fitted to the seat.
2.
Ensure the seatbelt is used and fitted correctly. The lap belt must be on thighs and not the abdomen
and the sash belt must always be across the chest.
3.
Ensure the child does not slouch or slump and the sash belt is across the chest.
4.
A sash belt under the arm or behind the back is dangerous (a child harness can resolve this).
5.
Ensure that if you are using a child harness that the lap belt is firm on the child’s thighs and not on
the abdomen. Do not tighten the child harness tether strap, just remove slack.
6.
Always use the sash guide set at the correct height to guide the sash across the chest and over the
shoulder. Always use the SLIDEGUARD™ converter.
7.
Ensure you advise the child not to undo the seatbelt buckle unless told to do so.
Precautions to prevent reducing the
safety offered by this booster seat.
