only be used for a low power accessory
or you could overload your lighting circuit
•
Plug the white Hitachi terminal into your OEM headlight terminal
Fitting the screen
•
Fit the screen into the tracks on the front of the fairing inserting a thumbscrew on
each side and screw into the black slider on the back of the fairing.
Be careful not
to cross thread the screw into the plastic slider.
•
Now fit the nylock screw onto the end of thread. This is just a backstop to avoid
losing the slider and should only be turned enough to stay secure ( see pic)
!
Fitting the Fairing
If you have the optional GPS mount then refer to those fitting
instructions now.
First, make sure that you strap up all the wiring at the back of the dash. Particularly, make
sure the steering sweeps cleanly from side to side without pinching or stretching any of
the wiring.
•
Rest the fairing on the front fender (holding on to it !) and attach the light
terminals and then slide the bottom of the fairing onto the two captive bolts on the
bottom bracket.
•
In order for the fairing to move back into position, you need to press the right side
( in travel direction) of the OEM backing plate inwards so that it slides inside the
fairing as shown in the photo :
