!
IMPORTANT : If your height adjustment causes either lamp to touch the fairing
openings it will cause an annoying vibrating noise and excessive wear. In this case,
remove fairing and bring the lamp rearwards using the top and bottom adjusters
When you are happy with the light adjustment, re-attach the fairing. Place a SS washer
before fitting a nylock nut on the rubber grommet and tighten.
A plastic washer should be fitted under the screw head on the fairing side of the top
mount before securing with a flange nut on the dashboard side.
Decals
Included in the kit is a decal pack containing some different shapes and colours for you to
apply if you wish. Application is the same as most decals and is best done by wetting the
fairing surface first and then using a squeegy to smooth any air bubbles out.
Manufactured by : Britannia Composites Ltd
5084 242
nd
Drive,
Langley, BC
Canada V2Z 2M9
Tel ; 1 (604) 612 2170
