22
Bath Shower Mixer - Installation
Before installation
Flush through the pipework to ensure
removal of debris. Turn off the mains
water supply and close any isolating
valves.
1. Attach push-fit connectors
Place the ‘push-fit connectors’ into the
holes in the bath top, ensure the rubber
‘O’ rings are fitted to the underside.
Position the ‘back nuts’ under the bath
(with rubber seals on top), ensuring the
locating pins fit into the cut-out in the
back nuts.
Loosely
tighten by turning the
push-fit connectors clockwise using the
correct size spanner.
Once threading has started you can let go
of the back nut.
2. Align push-fit connectors
Place the ‘spacer cover caps’ onto the
push-fit connectors.
Temporarily place the tap body onto the
spacer caps. Adjust the position of the
push-fit connectors so that the tap body
is straight and firmly positioned onto the
spacer caps.
Fully tighten the push-fit connectors and
remove the tap body.
Important:
The push-fit connectors
must be fully tightened to the back nuts
before attaching the flexible connecting
pipes.
Push-fit
connectors
Back nuts
with rubber
seals
‘O’ rings
Under
the
bath
Locating
pins
Spacer cover caps
