15
Basin Mixer Tap - Installation
Cover cap
Flexible
connecting
pipes
Hot
connector
3. Attach flexible connecting pipes
Important:
Before connecting the
flexible connecting pipes, please refer to
the specific installation requirements on
page 6.
Carefully screw the ‘flexible connecting
pipes’ into the ‘push-fit connectors’ and
turn the integral isolation valves to the
'closed' position as shown on page 6.
Note:
A flexible connecting pipe can be
fed up through the hot connector hole and
then screwed on if required.
Important:
Only tighten the flexible
connecting pipe by hand.
Do not
overtighten.
Connect the flexible connecting pipes to
the household water supply pipes.
4. Cover cap
If required place the cover cap over the
push-fit connector until the tap body is
ready to be fitted.
