manualshive.com logo in svg

Brillcam BVR-3808PS, User Manual, Page: 59 / 83

Share
Download
Brillcam BVR-3808PS User Manual Download Page 59

Brillcam Inc. Copyright 2020-2021 

Page  59  , Total  83     

•

 

Apply

: it allows the user to apply the settings. 

•

 

Cancel

: it allows the user to cancel the settings. 

 

3.4.3

 

Backup 

The user can select the 

“

Backup

”

 tab to make the archives backup. 

 

 

•

 

Start time and End time

: it allows the user to select the time of the records for backup. 

•

 

Ch.: 

it allows the user to select the back up channels or all chanels as defautl.   

•

 

Type:

 it allows the user to select the backup records type from the recording type from all, manual, 

schedule, motion and alarm etc. 

•

 

Query: 

the user can click it to seach the archives as the specified conditions. The archives files will be 

listed in the below table. 

•

 

Empty: 

the user can click it to delete all seached records files.

 

•

 

Format Disk: 

the user can click it to format the backup disk installed in the NVR. 

•

 

Check Disk: 

the user can click it to ask the NVR to check if there are backup disks connected.

 

•

 

Start Backup: 

the user can click it to start the archives backup process. 

 
Please be noted that if there is no backup disk installed, there will be the notification promoted as below. 

Summary of Contents for BVR-3808PS




















































































Reviews:

No comments