Brillcam BVR-3808PS User Manual Download Page 39

Page: 39 / 83

Page 39 , Total 83

•

Enable

: it allow the user to enable or disable the tour (or patrol) function.

•

Cycle

: it allow the user to set the waiting time of each tour.

•

Mode

: it allow the user to select to use 1 split or 4 split to run the tour;

•

Apply

: it allows the user to apply the settings.

•

Cancel

: it allows the user to cancel the settings.

2.14

Guide

The user can select

“

Guide

”

to start the configuration wizard, please check the chapter 1.

2.15

Quit

The user can select

“

Quit

”

to quit the system as below.

•

Logout

: it allow the user to logout the current account.

•

Reboot

: it allow the user to reboot the device.

•

Shutoff

: it allow the user to shut off the device.

Main menu introduction

In the page

“

Main menu

”

, the user can set all parameters for the NVR and cameras connected.

Summary of Contents for BVR-3808PS

















































































Search results

Summary of Contents for BVR-3808PS

Reviews:

Brillcam BVR-3808PS, User Manual, Page: 39 / 83

Search results

Summary of Contents for BVR-3808PS

Reviews: