Brillcam BVR-3808PS, User Manual, Page: 23 / 83

Brillcam Inc. Copyright 2020-2021 Page 23 , Total 83
•
Network card : The default network card 1;
•
IP address : the user can set the IP address of the NVR, it can be used to access from the web interface,
for example the user can use Internet Explorer to access the NVR remotely.
•
Subnet mask : the user can set the subnet mask; the default is 255.255.255.0;
•
Gateway : it allows the user to set the gateway of the network;
•
Main DNS : it allows the user to set the main DNS address.
•
Sub DNS : it allows the user to set the sub DNS address.
•
MAC : it shows the MAC address of the NVR to the user.
•
DHCP
：
The user can check it to enable the NVR to use DHCP mode to get the IP address from the router
automatically.
•
PoE Address : It allows the user to change the starting IP address of the PoE port. It ’s only applied for
the NVR with PoE ports built-in.
Refresh : click to refresh the new settings;
Default : click it to restore all parameters to the default settings;
Back : click to go back to the previous page;
Next : click to go to next page;
1.4 Remote monitoring
Click the “ Next ” to come to the page to add the NVR into the APP.