JB-QB-5Ei Users’ Manual
41
JB-QB-5Ei
Fire Alarm Control Panel
Figure 24 disable setting
Control panel can disable the following device: bus-device, loop, output control, fire alarm
device and so on . The disable indicator will be lit if any device in the system is disabled.
Disabled messages will be displayed in disable page(last disable message is always displayed in
the front place)
6.7 history record
History record is messages recorded in black box, control panel can record 999 fire alarm
messages and 999 other messages. These messaged can be stored for 10 years. User can
identify the status of control panel, detectors and other outside devices. Following event type
can be recorded: fire alarm, supervisory, association(include starting or feedback),fault ,
event(power on or power off),and so on. The fire alarm messaged must be recorded and other
message can be set to record or not. Refer to the “record select” function for detail. Press the
【
2
】
key to enter history record check function, the display is in figure 25 and figure 26.
Figure 25 fire alarm message recorded in the control panel
Figure 26 other messages recorded in the control panel
