JB-QB-5Ei
Users’ Manual
JB-QB-5Ei
Fire Alarm Control Panel
24
JB-QB-5Ei fire alarm control panel is the most important in the JB-QB-5Ei fixed fire detection
and fire alarm system, it controls all the system. This operation manual will lead you to understand
the fire alarm control panel super functions step by step.
Our Stipulations
In below descriptions
：
Words or chart symbol included in
【】
express press key
，
for example
：
【 】
expresses upturn
page key
，【
Reset
】
expresses reset key.
Each device connected into fire alarm control panel has one logic address. This address is
expressed by zone number and position number. The combination of zone number and
position number has uniquely confirmed one device. For example, fire audible and visible
sounder address is No.011 of No.3 zone. Main power supply address is No.023 of No.3 zone.
Here, there is no inevitable relation between “zone”, “alarm zone” and “detection zone”. That
is: they are not same concept. In addition, the devices in loop 1 alarm bus have been assigned
to No.1 zone. The devices in loop 2 alarm bus have been assigned to No.2 zone. So in this
system, “zone” and “loop” are same concept. Relevant device address assignment is referred
to Annex A.
Device address is expressed by 4 bits decimal base digits. Left 1 digit is zone (loop) number.
Right side 3 digits is position number, for example, 1023 expresses the device of No.023 of
No.1 zone.
1 General
1.1 Scope
The fire alarm control panel can be used for fixed fire detection & alarm and fixed water-based
local application fire-fighting in ship and offshore installations.
1.2 Standards
Chapter 3,Part Four of CCS Rules for the Classification of Sea-going Steel Ships 2012
MSC.311(88), AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY
SYSTEMS(FSS CODE),CHAPTER 9
MSC.339(91), ADOPTION OF AMENDMENTS TO THE INTERNATIONAL CODE FOR
FIRE SAFETY SYSTEMS (FSS CODE), CHAPTER 9
《
Guidelines for Type Approval Test of Electric and Electronic Products
》
GD01-2006
《
EN54
：
fire detection and fire alarm systems
》
MSC.1/Circ.1387 REVISED GUIDELINES FOR THE APPORVAL OF FIXED
WATER-BASED LOCAL APPLICATION FIRE-FIGHTING SYSTEMS FOR USE IN
CATEGORY A MACHINERY SPACES
1.3 Definitions
1.3.1
Supervisory signal
：
control panel monitored other input signal excluding fire alarm and fault
signal, such as, water level detection, intrusion detection, pressure, temperature, air conditioner
and so on.
