BRIGHT CB460 Series User Manual Download Page 3

Page: 3 / 28

III

CONTENT

WARNING------------------------------------------------------------------------------------- -------------------------------------------------1

INTRODUCTION------------------------------------------------------------------------------------ -----------------------------------------1

INSTALLATION------------------------------------------------------------------------------------- -----------------------------------------2

ELECTRICATION CONNECTION---------------------------------------------------------------- --------------------------------------2

SAFETY REGULATION--------------------------------------------------------------- ----------------------------------------------------3

BRIEF INTRODUCTION ON THE WHEEL BALANCER-------------------------------------------------------------------------3

MEANING OF THE SCALE--------------------------------------------------------------- ------------------------------------------------3

APPEARANCE OF THE MACHINE----------------------------------------------------------------------------------------------------4

CHARACTERISTIC AND FUNCTION-------------------------------------------------------- ------------------------------------------4

OPERATION NOTE----------------------------------------------------------------------- --------------------------------------------------5

GENERAL-------------------------------------------------------------------------------------------- -----------------------------------------5

TRANSPORT--------------------------------------------------------------------------------------- -------------------------------------------6

DETACHING THE PACKAGE------------------------------------------------------------------------------------------------------------6

OPERATION OF THE MACHINE --------------------------------------------------------------------------------------------------------7

TRANSPORTATION AND INSTALLATION -------------------------------------------------------------------------------------------7

HANDOVER NOTE----------------------------------------------------------------------------- ---------------------------------------------7

CABLE OF THE MACHINE ---------------------------------------------------------------------------------------------------------------7

PNEUMATIC CIRCUIT----------------------------------------------------------------------------------------------------------------------8

INSTALLATION SITE----------------------------------------------------------------------------- -------------------------------------------9

MOUNTING THREAD SHAFT-------------------------------------------------------------------------------------------------------------9

DISPLAY CONSOLE ------------------------------------------------------------------------------------------------------------------------10

SETUP OPERATION------------------------------------------------------------------------------------------------------------------------10

MOUNTING TIRE--------------------------------------------------------------------------------- --------------------------------------------12

INPUTING TIRE PARAMETER-----------------------------------------------------------------------------------------------------------12

RESIDUAL UNBALANCE DISPLAY---------------------------------------------------------------------------------------------------13

BALANCE MODE INTRODUCTION---------------------------------------------------------------------------------------------------13

ERROR HINT----------------------------------------------------------------------------------------- -----------------------------------------14

STANDARD DYNAMIC BALANCE-----------------------------------------------------------------------------------------------------14

STATIC BALANCE---------------------------------------------------------------------------------------------------------------------------16

WEIGHT CALIBRATION PROGRAM--------------------------------------------------------------------------------------------------16

PIEZOELECTRICITY SENSOR INSTALLATION AND CABLE-----------------------------------------------------------------17

TROUBLESHOOTING AND ITS SOLUTION----------------------------------------------------------------------------------------18

WHEEL BALANCER ACCESSORY----------------------------------------------------------------------------------------------------20

MAINTENANCE-------------------------------------------------------------------------------------------------------------------------------20

LUBRICATION---------------------------------------------------------------------------------------------------------------------------------21

ATTACHMENT

Ⅰ

-----------------------------------------------------------------------------------------------------------------------------23

ATTACHMENT

Ⅱ

-----------------------------------------------------------------------------------------------------------------------------24

ATACHMENT

Ⅲ

-------------------------------------------------------------------------------------------------------------------------------25

Summary of Contents for CB460 Series





























Search results

Summary of Contents for CB460 Series

Reviews:

Related manuals for CB460 Series

Brands by name

Popular brands

BRIGHT CB460 Series, User Manual

Search results

Summary of Contents for CB460 Series

Reviews:

Related manuals for CB460 Series

Brands by name

Popular brands