3
Safety regulation
It will cause the serious injuries to the operators
and the other persons if not in accordance to the
regulation.
You can only operate the machine when
completely read and understand the entire
danger/warning hints.
The correct use of the machine need the
professional authorized operator who must has
got the appropriate training and can understand
the instruction manual of the factory, familiar to
the safety regulation and cannot drink and
smoke
to
avoid
the
influence
on
the
physiological and mental.
The following conditions are necessary:
- Read and understand the info and instruction in
the manual;
- completely know the characteristic and feature
of the machine;
- Keep the unauthorized person far from the
operation area;
- Secure the installation of the machine in
accordance with the relative standard and
regulation;
- Secure all the machine operators have been
trained and can correctly and safety use the
machine and under the enough monitoring in the
process of operation.;
- Before confirm the power off, do not touch the
cable or motor or any part in the electrical
equipment;
- Carefully read the manual and know how to
correctly and safely use the machine;
- Always refer to the manual.
-Do not remove or abrade any label of the
warning and instruction on the danger or replace
the label missing or fuzzy. You must get the label
from your nearest dealer if any label is missing
or damaged.
-Check the use and the relative accident
defensive regulation of the standard and the
high-voltage and rotation parts.
- The manufacturer will not be responsible for the
damage and accident from the unauthorized
changes or modification.
In the work and maintenance, you should always
tie up the hair and do not wear the loosen clothing,
necktie and watch or the others can be gripped
into the movable parts.
Brief introduction of the wheel
balancer
Purpose of the design
This model of wheel balancer with the functions
of CPU, digital display and high performance is
designed to balance the car or van tire of 65kg.
ALU mode make us balance the various
appearances of the aluminum alloy tire.
Meaning of the label (including
the indicated instruction)
light
This label is at the rear of the machine to indicate
that there is the plug of the power cable and the
operator should care about the personal safety.
Summary of Contents for CB460 Series
Page 1: ...I WHEEL BALANCER USER MANUAL Pls read this manual before operation ...
Page 14: ...11 Press to the option select item Enter the self calibration see the following FIG 9 ...
Page 27: ...24 ATTACHMENT Ⅱ Single phase power board cable diagram ...
Page 28: ...25 ATTACHMENT Ⅲ Electrical theory diagram Input ...
