20
WHEEL BALANCER
ACCESSORY
MAINTENANCE
Warning
The manufacturer will not bear any responsibility
if the problems are caused by the application of
the unoriginal spare parts and accessories.
Warning
Pull out the power plug and secure all the
movable parts are locked before the execution
of the adjustment and maintenance.
Warning
Do not remove or improve any part of the
machine.
Cause
Keep the working area clean.
Never use the compressed air /water water spray
to remove the dust and residual on the machine.
Prevent the coming of the dust in the process of
the operation.
Keep the clean of the balance shaft, nut, cone
and the flange. Use the brush rinsed in the
neutral solution to clean these parts.
Carefully operate the cone and flange to avoid
the accident fall and the following damage. Its
result is the influence on the accuracy of the
centering. Place the cone and flange in the
condition of dust-proof. If necessary, use the
ethanol to clean.
Standard accessory
Accessory
Name
Quantity
Accessory
Name
Quantity
Cone/
flange
disk
1 set
Br
scale
1 piece
pliers
1 piece
thread
shaft
1 piece
Quick nut
1piece
weight
1piece
Summary of Contents for CB460 Series
Page 1: ...I WHEEL BALANCER USER MANUAL Pls read this manual before operation ...
Page 14: ...11 Press to the option select item Enter the self calibration see the following FIG 9 ...
Page 27: ...24 ATTACHMENT Ⅱ Single phase power board cable diagram ...
Page 28: ...25 ATTACHMENT Ⅲ Electrical theory diagram Input ...
