background image

 
 

X-treme 

14 

3.3. Clocking in training  

 

 

 

 

  10:17:59 

     BRXA0001       UK V01.60 

  Naam Liefhebber 

Bricon X-treme general info 

Pige.    Bask.      Clock        Train.      Race 

250     20             4 

      3            1 

Service before 1/1/2019 

Once you connect the X-treme to the antenna. You see some sec-
onds the general information on the display. If there are no loft an-
tennas found, you see the following message on the display : ‘No 
antenna connected. After you press the ‘C’ button you will return to 
the menu. If there are flights actief, the X-trema starts in clocking 
mode, if there are no flights active the X-treme starts in training 
mode. For security reasons you can not leave the clocking mode. 
 

 

 

 

 

  10:17:59 

     Training with : 1 ant. 

  Clocked : 0 

05-4777130 

15/09/11—13:12:44 

loft 

 Race         club 

cat.     Position 

  Training 2 

By pressing <C> you leave the training mode and the menu is ac-
tive. With <◄> and <►> you can scroll in the menu.  
Confirm the selection with <OK>.  
If you wand to clock  the same birds again, you must first erase 
the data. 

 

 

 

 

  10:17:59 

     BRXA0001       UK V01.60 

   

 

 

 

 

 

    Delete 

Delete

: confirm by pressing  <OK>, all clockings are deleted !! 

Attention: The clocking of not closed or released flights can not 

be deleted. 
 

Clocking

:you can start clocking again when you select clock-

ing in the menu confirm with  <OK>. 

Here you can see the basketed flights on your X-treme. 

 

 

 

 

  10:17:59 

     BRXA0001       UK V01.60 

  Name Fancier 

Race: 01 

 

Status : 05 

18.11.11  10:25:28  10:25:28  +0 

00.00.00  00:00:00  00:00:00  +0 

>>>                        1234NOYO            <C> 

 

 

 

 

 

  10:17:59 

     BRXA0001       UK V01.60 

  Name Fancier 

Race: 02                      status : 00 

00.00.00    00:00:00    00:00:00    +0 

00.00.00    00:00:00    00:00:00    +1 

>>>                                                       <C> 

 

10:17:59 : reëel uur 
18.11.11 : Date basketing Race 1 
10:25:28 : Syncronisation Time basketing Race 1 
10:25:28 : Time Fancier clock 
+0 : defference Time x-treme and GPS/HKW 

Status : 
0 : No Race 
1 : Basketing 
5 : Clocked 
7 : read out race not closed 
OFF : Race closed 

Pige.: Pigeons in clock 
Bask: Total of pigeons basketed 
Train: Clocked training pigeons 
Race: Races in thhe clock 
Service: date for service . 

Summary of Contents for X-treme






















Reviews: