4.3.3 Read out / upgrade your X-treme
Start up PrintManager
Press read out, Print Manager will ask to connect an ETS
Connect the X-treme with the USB cable to your computer.
Print Manager will read out the clock
After the read out is finished a message you can disconnect the clock by unplugging
the USB cable.*
*After the read out is done the above message may appear requesting to upgrade your X-
treme. This will only show up if a new X-treme version is available.
To do the upgrade follow the insctuctions on the screen or if you don’t wish to upgrade
press Annuleren (cancel).
Summary of Contents for X-treme
Page 2: ......
