background image

 
 

 

 

 

 

 
 

 

 
 
 
 
 
 

 

 

3) X-treme, a quick start

 

 
    

Please read carefully the chapters and especially installation and assembly.      

    Once the hardware installation is complete, you only use the X-treme if there is pigeon and  
    fancier data is present.  
    The fancier and pigeon data is inserted into the club wit he clunb software  
    “BRICON Club Editor “ . 

3.1 Linking birds 

    With “Bricon Club Editor, you can add/remove easily pigeons. You can also send the fancier data  
    to the clock 

If there are pigeons in the X-treme, you can scroll through the 
pigeon list..

 

With <◄> and <►>.

 

Use the <▲> and <▼> to select the first or last pigeon in the 
list. 

 

3.2 Browsing pigeons 

X-treme      13 

Whit this feature you start the clocking function .  
The clock will first search for the connected antennas and then 
boot into clocking or training mode. 

 

 

 

 

  10:17:59 

     BRXA0001       UK V01.60 

   

09-4200807 

 

 

 

 

 

 

  10:17:59 

     BRXA0001       UK V01.60 

  Clocked  : 42                   Race : 7/11 

09-4200808 

19/11/11 - 11:25:29 

Loft   Race    club    cat.   Position 

1        BOUR   123   oude  1 

19/11/11 – 11:25:29 : time /date clocking 
Loft:  antenna number 
Race: Race ID 
Club: Club ID 
Cat.: Jonge/oude/jaarse 
Position: getekende 

Pigeon is not clocked on training or race. 

Summary of Contents for X-treme






















Reviews: