Bricon X-treme, User Manual

Page: 8 / 21

10:17:59 Test with : 1 ant.
7909DFFAEF
#02
X-treme 8
Choose with <◄> en <►> the symbol ‘setup’ press <OK> and select
‘Progr. antenna’ (fig. 1), press the <OK> button.
The X-treme will show the number of antenna that currently exist. With the buttons
<▲> and <▼> you can choose a number between 1 and 16. After the antenna number is
chosen, confirm with <OK>. If you want to program more than one antenna, follow the
actions again but choose another ID (Antenna number)
!!! attention: All antennas must have a different number.
2.4. Testing of the antennas
It is recommended that you test the antennas at regularly perform ( Fig. 2) .
The X-treme indicates how many antennas are connected. With a chip you can test the pro
per functioning of the antennas. Each time the chip is read, the X-treme produces a beep
and you see de chip ring number on the display . If you can read the ring at a height of 5 to
6 cm, you can assume a proper operation.
Fig.1
10:17:50 BRXA0001 UK V01.60
Fancier name
Setup
10:17:50 BRXA0001 UK V01.60
Progr. antenna
10:17:59 BRXA0001 UK V01.60
Search antennas
10:17:59 BRXA0001 UK V01.60
Antenna number : 2
Fig. 2
10:17:59 BRXA0001 UK V01.60
Naam Liefhebber
Testing antennas
Antenna test mode
7909DFFAEF : chipring number
#02 : Antenna number