Brickcom NR-1104 User Manual Download

Page: 55 / 190

The selected hard disk drive in the Free HDDs field will be marked in blue and please

click

to recruit the hard disk drive into Assigned HDDs field.

The selected hard disk drive in Assigned HDDs field will be marked in blue.

Meanwhile, Target RAID Disk is ready to build RAID disk and it shows five types of

disk configuration.

The introduction of disk configuration is in the below table.

Disk Configuration

Big Drive

(Linear)

Big Drive is a collection of hard disk drives and does not

provide any RAID protection. The data are written to the

disks continuously.

Performance

(Raid0)

RAID0is one larger volume with 2 or more hard disk drives. The

data are written to the hard disk drives without any parity

information. The total storage capacity is the sum of all hard disk
drives.

Fault

Tolerant

(Raid1)

2 hard disk drives are required to create a RAID1 array.

RAID1 can provide disk mirroring by duplicating the data

between two hard disk drives.

Summary of Contents for NR-1104































































































































































































Search results

Summary of Contents for NR-1104

Reviews:

Related manuals for NR-1104

Brands by name

Popular brands

Brickcom NR-1104, User Manual

Search results

Summary of Contents for NR-1104

Reviews:

Related manuals for NR-1104

Brands by name

Popular brands