Breville recommends safety first
We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,
our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any
electrical appliance and adhere to the following precautions:
Important Safeguards for Breville Wizz Stick
•
Read all instructions before operating and save for
future reference.
•
Remove any packaging material and promotional
labels before using the Wizz Stick for the
first time.
•
Do not place the Wizz Stick near the edge of a
bench or table during operation. Ensure the surface
is level, clean and free of water, flour, etc.
•
Do not place the Wizz Stick on or near a hot gas or
electric burner, or where it could touch a
heated oven.
•
Always make sure the Wizz Stick is completely and
properly assembled before operating.
•
Always ensure the blending shaft is securely fitted
onto the motor body before operating.
•
Do not operate the Wizz Stick with wet hands.
Ensure hands are dry.
•
Do not attempt to operate the Wizz Stick by any
method other than those described in this booklet.
•
If using the Wizz Stick to blend hot food in a
saucepan, remove the saucepan from the heat
source and ensure the liquid is not boiling. Allow
hot food to cool slightly before blending. The power
cord and body of appliance should be kept away
from the heat source.
•
When mixing liquids especially hot liquids use a tall
container or use small quantities at a time to
reduce spillage.
•
Handle the Wizz Stick with care – remember the
blades on the blending shaft are very sharp and
should be kept out of the reach of children.
•
Use only the blending shaft provided with the Wizz
Stick.
•
Do not operate the appliance continuously for more
than 40 seconds. Allow the motor to rest for 1
minute between each use.
•
Never mix dry, thick or heavy mixtures for more
than 15 seconds. Stop the operation and stir the
ingredients before continuing. Allow the motor to
rest for 1 minute between each use.
•
Do not leave the Wizz Stick unattended when
in use.
•
Always ensure the Wizz Stick is switched off at the
power outlet and the cord is unplugged before
attempting to move the appliance, when not in
use, if left unattended and before disassembling,
cleaning or storing.
•
If food becomes lodged around the processing
blade or in the blade guard, switch the power off
at the power outlet and unplug the cord before
removing the blending shaft from the motor body.
Use a spatula to dislodge the food. Do not use
fingers as the blades are sharp.
•
Do not remove the Wizz Stick from ingredients
during operation. Ensure the appliance is switched
off and has stopped turning before removing, to
avoid contact with moving blade and splashing of
hot liquids.
•
To protect against electric shock do not immerse
the motor body, cord or power plug in water or any
other liquid.
4
All manuals and user guides at all-guides.com
