![background image](http://html.mh-extra.com/html/kaon/ar1031/ar1031_quick-installation-manual_653010001.webp)
Set up AR1031 with the KAON App
Wi-Fi Mesh Extender
AR1031
Quick Installation Guide
Step 2.
Launch the app. Select AR1031 from the device list.
Step 3.
Connect your home gateway to AR1031
Follow the step-by-step instructions on the App to connect
your home gateway to the AR1031 unit.
Step 4.
Scan QR code printed on a label on the back of the
AR1031 to connect your smartphone to the AR1031.
Step 5.
Enter your login information printed on a label on the
bottom of the AR1031 and tap Login. You can see the dashboard
of the app after you successfully set up your Wi-Fi network.
Step 6.
Add AR1031(s) to an existing Wi-Fi Network
If you have more than one AR1031 unit, tap icon on the
top right hand corner of the dashboard to add additional
AR1031(s) one by one. After successfully scan its QR code, tap
Add new AR1031 to create a mesh network.
Step 1.
Download the KAON WiFi App
Step 7.
Customize the network name and password
Tap icon on the top right hand corner of the dashboard,
and select the Wi-Fi settings to create your own network name
(SSID) and password.
Note
If your device disconnects from the Wi-Fi network,
view the available Wi-Fi network and then choose
the new network name (SSID) and enter the new
password.
Scan the unique QR code below, or go to Google Play or the Apple
App Store to download the KAON WiFi app. Install the app on a
compatible iPhone or Android smartphone.
<FCC User manual Statements>
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.21 statement
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
RF Exposure Statement (MPE)
The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is
maintained between the radiator (antenna) and all persons at all times. This device must not
be co-located or operating in conjunction with any other antenna or transmitter.