![background image](http://html1.mh-extra.com/html/planet/poe-e101/poe-e101_user-manual_1562276001.webp)
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Introduction
1.1 Packet Contents
Thank you for purchasing
PLANET POE-E101 IEEE
802.3af Power over Ethernet Extender
, your Power
over Ethernet Extender package shall contains following
contents:
Check the contents of your package for following parts:
Power over Ethernet Extender x 1
User's Manual x 1
If any of these pieces are missing or damaged, please
contact your dealer immediately, if possible, retain the
carton including the original packing material, and use them
against to repack the product in case there is a need to
return it to us for repair.
1.3 Technical Specification
Model
POE-E101
Interfaces
LAN IN
1 x 10/100Base-TX Ethernet with IEEE
802.3af PoE
“Data + DC”
in Auto MDI/
MDI-X, Auto-negotiation RJ-45 connector
LAN OUT
1 x 10/100Base-TX Ethernet with IEEE
802.3af PoE
“Data + DC”
out Auto
MDI/MDI-X, Auto-negotiation RJ-45
connector
Power over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet
PoE Power
Supply Type
Mid-Span / Type B
PoE Power
Output
48V DC, 270mA, Max. 13 Watts
Power Pin
Assignment
4/5(+), 7/8(-)
Hardware Specification
Data Rate
10/100Mbps
Switch
Architecture
Store-and-Forward
Switch
Throughput
148810pps@64Bytes
Latency
7.840µs
2.2 Ports connection
IN Port
Connect the
PoE IN
port from following
802.3af
PSE
device through a CAT-5e/6 UTP
cable:
• PoE injector
• PoE Injector Hub
• PoE Ethernet Switch
• Previous POE-E101
OUT Port
Connect the
PoE OUT
port to following
802.3af
PD
device through a CAT-5e/6 UTP
cable:
• PoE IP Camera
• PoE VoIP Phone
• PoE Wireless AP
• PoE Splitter
• Next POE-E101
2.3 LED definition:
LED
Color Function
PoE IN
Green
Lights
to indicate the port is
providing 48VDC in-line power.
LNK/
ACT
Green
Lights
to indicate the port is link up.
Blink
: indicate that the extender is
actively sending or receiving data
over
IN
port.
PoE OUT
Green
Lights
to indicate the port is
providing 48VDC in-line power.
Standard
Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 10/100Base-TX Fast
Ethernet
IEEE 802.3af Power over Ethernet PSE /
Mid-Span
IEEE 802.3af Power over Ethernet PD /
Mid-Span
IEEE 802.3x Flow Control
Environment
Operating
Temperature: -10 ~ 60 Degree C
Relative Humidity: 0 ~ 95%
(non-condensing)
Storage
Temperature: -40 ~ 85 Degree C
Relative Humidity: 5 ~ 95%
(non-condensing)
1.2 Key Features
● Complies with
IEEE 802.3af Power over Ethernet
● Extends the range of PoE an additional 100 meters
(328ft.)
● Forwards both Ethernet
data
and PoE
power
to remote
device
● Auto-detect and protect of PoE equipment from being
damaged by incorrect installation
● Multiple units, daisy-chain installation support
● No external power cable installation required
● Compact size, Wall-mountable design
●
Plug-and-Play
installation
Maximum
Frame Size
1552Bytes
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LED Indicators
• 1 x PoE IN (Green)
• 1 x LAN Data (Green)
• 1 x PoE OUT (Green)
Protection
ESD (Ethernet) : 6KV (TBD)
Surge (EFT for power) : 6KV (TBD)
Dimension
(W x D x H)
94 x 70 x 26 mm
Weight
215g
Power
Requirement
IEEE 802.3af compliant with voltage
within 44V-56V DC
Power
Consumption
2 Watts (system maximum)
Mechanical
Metal / Wall Mountable
Cable
TIA/EIA-568, Category 5/5e cable
Standards Conformance
Regulation
Compliance
FCC Part 15 Class A, CE
2. Hardware Description
2.1 Product Outlook
3. Hardware Installation
This product provides two different running speeds –
10Mbps, 100Mbps in the same device and automatically
distinguishes the speed of incoming connection.
This section describes the hardware features of POE-E101.
Before connecting any network device to the POE-E101,
read this chapter carefully.
3.1 Before Installation
Before your installation, it is recommended to check your
network environment. If there is any far away IEEE 802.3af
devices need to power on, the POE-E101 can provide you a
way to supply power for this Ethernet device conveniently
and easily.
The POE-E101 is installed between the PSE (Power Source
Equipment) and the PD (Powered Device); it is powered
by PSE and forwards the Ethernet data and remaining POE
power to the PD. The POE-E101 doesn’t require an external
power supply and it can be installed easily just plug and
play; that means the operator does not need to configure
the POE-E101. The POE-E101 injects power to the PDs
without affecting the data transmission performance. It
offers a cost effective and quick solution to extend power
and data an additional 100m.
Note
The POE-E101 can be installed with third-party
device if the device complied with IEEE 802.3af
standard.