8
EMPTYING AND CLEANING
Always switch off and unplug your HotCup
™
and allow it to completely cool
before cleaning. Never immerse the base unit, power cord or plug in water or any
other liquid. Do not use harsh abrasives, chemicals or oven cleaners.
Emptying your HotCup
™
1.
Fill your HotCup
™
with a quantity of water that just covers the perforated stainless
steel element cover.
2.
Place a suitable cup or container below the dispensing nozzle. Set the dispense
control to the setting.
3.
Press the start button.
4.
After the water has been dispensed, empty the cup and replace it back under the
dispensing nozzle.
5.
Press the start button again.
6.
Discard the water.
Your HotCup
™
is now empty.
If your HotCup
™
will not be used for an extended period (e.g. if you are on holiday), we
recommend that you first empty it.
Before using your HotCup
™
again, carry out several boil cycles discarding the water each
time.
Cleaning
Clean the exterior surface of your HotCup
™
with a damp cloth and then polish it with a
soft, dry cloth. Do not use steel wool pads or harsh/abrasive cleaners.
Summary of Contents for hotcup vkj476
