11
tHe BlenDeR Jug
Assembling and operating the
blender jug
The food processor bowl and lid must be locked
into position for the blender jug to operate.
The processing blade or slicing/grating discs are
not required to be in position in the food processor
bowl when using the blender jug. Refer to page 8
for assembling the food processor.
Step 1.
Place the motor base on a level, dry
surface, such as a bench top.
Removing the blender safety locking
cover
Step 2.
Remove the blender safety locking cover
by rotating clockwise to unlock then lift
out of position.
the Wizz™ Processor Duo blender will not
operate unless the food processor bowl and
lid are correctly assembled.
Attaching the blender jug and lid
Step 1.
Place the blender jug onto the motor base
over the symbol and turn jug anti-
clockwise until it locks into place.
1
Step 2.
Turn the filter basket anti-clockwise to slot
the locking tab on the filter basket into the
interlocking safety catch in the motor base.
Ensure the filter basket is positioned firmly.
2
Step 3.
Place the citrus cone onto the drive shaft
through the centre hole of the filter basket.
3
Juicing with the citrus juicer
Slice citrus fruit in half across the fruit segments.
Place a citrus fruit half over the citrus cone, and
hold down, turning the speed control dial to a low-
range speed. Keep pressure over the fruit as the
cone rotates, being careful to keep hand and fingers
clear of the rotating citrus cone and filter basket.
Assembling and using of your Breville Wizz™ Processor Duo
continued
Assembling and using of your Breville Wizz™ Processor Duo
continued