8
Note:
Plastic pole placed under
the egg tray, please check
before disposal of the
packaging.
PLASTIC MOUNTING INSTALLATION
1.
Fasten the plastic pole onto your fix pole with mounting base, clamp, washers, screws and
nuts. Following below 1a, 1b, 1c sequences:
1a. Insert the plastic pole into the hole of the mounting
stand, and then secure it with the screw and nut.
1c. Fasten the mounting stand and
clamp together onto a fix pole with
4 long screws and nuts.
1b. Apply 2 rubber pads on the mounting clamp.
2. Apply 4 rubber pads on the inner sides of the mounting base
and clamp of the 7-in-1 sensor, and loosely fasten them
together.
