manualshive.com logo in svg

Bresser Vixen AXJ Equatorial Mount, Instruction Manual

The Bresser Vixen AXJ Equatorial Mount is a high-quality astronomical mount designed for precision tracking and smooth maneuverability. To get the most out of this product, make sure to download the Instruction Manual for free from manualshive.com, providing detailed step-by-step instructions and essential tips for optimal usage.

Share
Download
background image

3

TABLE OF CONTENTS 

Page

PREFACE ------------------------------------------------------------------- P 2

TABLE OF CONTENTS ----------------------------------------------------- P 3

BEFORE USE --------------------------------------------------------------- P 4

Checking the Package Contents ----------------------------------------------- P 4
AXJ Mount Components -------------------------------------------------------- P 5
STAR BOOK TEN Components ------------------------------------------------- P 7
Screen Menus and Instructions ------------------------------------------------ P 8
Flow of Operation ---------------------------------------------------------------- P 9

Chapter 1

PREFACE ------------------------------------------------------------------- P 2

About the Internal Battery of STAR BOOK TEN ------------------------------- P10
Assembling the Mount ---------------------------------------------------------- P11
I. Setting up the Tripod ---------------------------------------------------------- P11
II. Setting up the Mount --------------------------------------------------------- P12
III. Attaching the Counterweight ----------------------------------------------- P13
IV. Attaching a Saddle Plate ---------------------------------------------------- P14
V. Attaching the Optical Tube --------------------------------------------------- P15
VI. Balancing the Mount in Declination ---------------------------------------- P16
V II. Balancing the Mount in Right Ascension (R. A.) ------------------------- P17
VIII. Connecting the STAR BOOK Cable --------------------------------------- P19
IX. Connecting the Power Cable ----------------------------------------------- P19

Chapter 2

INITIAL SETTING ----------------------------------------------------------- P 20

I . Turning ON the Power -------------------------------------------------------- P20
II . Setting/Language ------------------------------------------------------------ P20
III . Setting Local Time ---------------------------------------------------------- P21
 

Time Zone -------------------------------------------------- P21

 

Clock Adjust ----------------------------------------------- P22

IV . Setting Location ------------------------------------------------------------- P22

Chapter 3

BASIC OPERATION -------------------------------------------------------- P24

AUTOMATIC GO-TO SLEWING ------------------------------------------- P25

Appendix 

Dimensions of the AXJ Mount ------------ P114

Moving the Telescope ----------------------------------------------------------- P24
Changing the Go-To Slewing Speed ------------------------------------------- P24

Chapter 4

Chapter 5

 

I. How to Use the Polar Aligrment ----------------------------------P53

 

Basic Operation ------------------------------------P54

 

Polar Alignment ------------------------------------P55

 

About PF-L Assist App ----------------------------P66

 

Precise Polar Alignment ---------------------------P67

 

Change the initial Altitude Setting 

 

to Low or Hight -------------------------------------P70

 

II. Initial Configuration ----------------------------------------------P71

 

Use Last Mount Setting ---------------------------P71

 

Setting Local Time ---------------------------------P71

 

Setting Location ------------------------------------P71

 

LCD Adjustment ------------------------------------P71

 

Night Vision -----------------------------------------P72

 

Key LED Brightness --------------------------------P72

 Volume ----------------------------------------------P73
 

Atmospheric Refraction ---------------------------P73

 Language -------------------------------------------P74
 

Initialize Memory Data -----------------------------P74

 

About StarBook TEN -------------------------------P75

 

About LAN ------------------------------------------P75

 

III. System Menu (Main menu) --------------------------------------P76

 

Chart Setting ---------------------------------------P76

 

Display Style ----------------------------------------P76

 Constellation ---------------------------------------P77
 

Display of Star --------------------------------------P78

 

Star Popular Name ---------------------------------P79

 

Bayer Designation ---------------------------------P80

 

Sun, Moon, Planet ----------------------------------P81

 Comet -----------------------------------------------P81
 Satellite ---------------------------------------------P82
 

RADEC Grids ---------------------------------------P82

 

Center Circle ---------------------------------------P83

 

Catalogue Objects ---------------------------------P83

 

Mount Setting --------------------------------------P85

 

Direction Key ---------------------------------------P85

 AltAz
 RADEC
 X-Y
 

Auto Guider -----------------------------------------P86

 

PEC (Periodic Error Corrction) --------------------P87

 

Backlash Compensation --------------------------P90

 

GOTO Speed ----------------------------------------P92

 

Polar Scope Light ----------------------------------P92

 

Motor Power ----------------------------------------P93

 

Mount Type -----------------------------------------P94

 

Cross Over Meridian -------------------------------P95

 

Delete Align Point Data ----------------------------P97

 

Following Object -----------------------------------P97

  IV . System Setting -----------------------------------------------------P98
 

Local Time Setting ---------------------------------P98

 Location ---------------------------------------------P98
 

GOTO Message ------------------------------------P99

 Language ------------------------------------------ P100
 

Expansion Function ------------------------------- P100

 

Mount Information -------------------------------- P101

  V . Using as a Stand-alone Unit ------------------------------------ P102
 

Connecting to LAN

 Requirements
  VI . Updating your STAR BOOK TEN -------------------------------- P103

VII . Entering Orbital Elements and 
 

User Defined Objects -------------------------------------------- P105

Chapter 6

Startup Procedure  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P25
 

I . Locating the AXJ Mount  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P25

  II . Home Position - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P26
  III . Alignment   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P27
  IV . Slewing to an Object in SCOPE MODE   - - - - - - - - - - - - - - - - - - - - P32
  V . Slewing to an Object in CHART MODE  - - - - - - - - - - - - - - - - - - - - P33
  VI . Slewing with Command Keys   - - - - - - - - - - - - - - - - - - - - - - - - - - P35
 

1 SO LA R  key --------------------------------------------------------P35

 

 2 NAMED  key --------------------------------------------------------P35

 

 4 M  

 key --------------------------------------------------------P35

 

 5 NGC /IC  key --------------------------------------------------------P35

 

 6 STAR

 key --------------------------------------------------------P35

 Example:
 

Go.To slewing with the NGC/IC key   - - - - - - - - - - - - - P36

 

Moon Map   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P37

 

 7 OBJECT  key  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P44

 

Recently Located Objects- - - - - - - - - - - - - - - - - - - - P44

 Constellation   - - - - - - - - - - - - - - - - - - - - - - - - - - - - P45
 Coordinates  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P46
 Comet  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P47
 

Satellite (Artifical Satellite)   - - - - - - - - - - - - - - - - - - - P49

 

User Coordinates   - - - - - - - - - - - - - - - - - - - - - - - - - P51

 

Home Position   - - - - - - - - - - - - - - - - - - - - - - - - - - - P52

APPLICATION ------------------------------------------------------P53

Summary of Contents for Vixen AXJ Equatorial Mount





















































































































Reviews:

No comments

Related manuals for Vixen AXJ Equatorial Mount

I-G3N Z Series Reference Manual preview
Z Series
Brand: I-G3N Pages: 28
4B P300 Series Operation Manual preview
P300 Series
Brand: 4B Pages: 16
Uclear AMP Series User Manual preview
AMP Series
Brand: Uclear Pages: 2
Yakima SideWinder Installation Instructions And Owner'S Manual preview
SideWinder
Brand: Yakima Pages: 8
Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
Yealink EXP40 Quick Reference Manual preview
EXP40
Brand: Yealink Pages: 2
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
PCB Piezotronics ICP 137B21B Installation And Operating Manual preview
ICP 137B21B
Brand: PCB Piezotronics Pages: 7
Redkite Baby Go Round Twirl Instruction Leaflet preview
Baby Go Round Twirl
Brand: Redkite Pages: 4
SIIG 04-0585C Quick Install Manual preview
04-0585C
Brand: SIIG Pages: 12
B-Speech Pago INBTHF020 User Manual preview
Pago INBTHF020
Brand: B-Speech Pages: 24
SaMASZ PSV 161 Operating Manual preview
PSV 161
Brand: SaMASZ Pages: 29
Ciro Cybercharger Quick Start Manual preview
Cybercharger
Brand: Ciro Pages: 2
HEISSNER Z1-00 Instructions For Use preview
Z1-00
Brand: HEISSNER Pages: 2
IFM Electronic LR8009 Operating Instructions Manual preview
LR8009
Brand: IFM Electronic Pages: 37
pleasant hearth OFP24WG Manual preview
OFP24WG
Brand: pleasant hearth Pages: 12
ZALMAN Z-MACHINE GT1000 Manual preview
Z-MACHINE GT1000
Brand: ZALMAN Pages: 16
Nauticam NA - D780 User Manual preview
NA - D780
Brand: Nauticam Pages: 22

Brands by name

Popular brands

Load more brands