Bresser Vixen AXJ Equatorial Mount Instruction Manual Download Page 80

Page: 80 / 116

Chapter 5 APPLICATION

The setting is defaulted to „Brighter than Mag. 3“

Bayer Designation

This allows you to limit Bayer designation of fixed stars displayed on the star chart by magnitude at the widest chart. Also,” Always ON” or
“Always OFF” is available.

Always ON:

Bayer designation of fixed stars is always indicated.

Brighter than Mag.5:

Bayer designation of fixed stars of 5th magnitude and brighter are displayed.

Brighter than Mag.4:

Bayer designation of fixed stars of 4th magnitude and brighter are displayed.

Brighter than Mag.3:

Bayer designation of fixed stars of 3rd magnitude and brighter are displayed.

Brighter than Mag.2:

Bayer designation of fixed stars of 2nd magnitude and brighter are displayed.

Brighter than Mag.1:

Bayer designation of fixed stars of 1st magnitude and brighter are displayed.

Always OFF:

Bayer designation is always hidden.

The number of Bayer designations of the fixed stars is increased as you zoom in the screen.

Example: Set to „Brighter than Mag.1“

Example: Set to „Brighter than Mag.3“

Example: Set to „Always OFF“

In the “Chart Setting” menu, choose “Bayer Designation” with the or direction key and press the

key (or the

key) to call up the

dialog box.

In the “Bayer Designation” dialog box, choose
your desired option with the or direction key.

Press the

key (or the

key) to save and leave the dialog box.

Summary of Contents for Vixen AXJ Equatorial Mount





















































































































Search results

Summary of Contents for Vixen AXJ Equatorial Mount

Reviews:

Related manuals for Vixen AXJ Equatorial Mount

Brands by name

Popular brands

Bresser Vixen AXJ Equatorial Mount, Instruction Manual

Search results

Summary of Contents for Vixen AXJ Equatorial Mount

Reviews:

Related manuals for Vixen AXJ Equatorial Mount

Brands by name

Popular brands