Bresser Vixen AXJ Equatorial Mount Instruction Manual Download Page 50

Page: 50 / 116

Chapter 4 AUTOMATIC GOTO SLEWING

Press the

key to complete the entry. Then, press the

key again to leave this menu. If a wrong number is entered, the item for the

entry will be highlighted in red to alert you.

Setting, Changing or Deleting the Orbital Elements of the Satellite

OK: Choose OK to slew the telescope to the satellite you chose.

Press the

key to start the Go-To slewing. To stop, shift the cursor to Cancel with the

(or • ) direction key and press

the (or

) key. The entry dialog box disappears

and you are ready to choose another.

Change Data:

Choose “Change Data” to rewrite the orbital elements.

To change the parameters of the set orbital elements, display the entry dialog box and choose “Change Data” with the or direction key.
Then, press the

key to change the

parameters.

Delete:

Choose “Delete” to clear the orbital elements.

To delete the parameters of the set orbital elements, display the entry dialog box and choose “Delete” with the or direction key. Then, press the

key.

Summary of Contents for Vixen AXJ Equatorial Mount





















































































































Search results

Summary of Contents for Vixen AXJ Equatorial Mount

Reviews:

Related manuals for Vixen AXJ Equatorial Mount

Brands by name

Popular brands

Bresser Vixen AXJ Equatorial Mount, Instruction Manual

Search results

Summary of Contents for Vixen AXJ Equatorial Mount

Reviews:

Related manuals for Vixen AXJ Equatorial Mount

Brands by name

Popular brands