Bresser 8020211B4K000 Instruction Manual Download Page 9

9

DE

GB

FR

IT

ES

Gar

antie / W

arr

anty

their voltage supply, effective range, and life span. 
3.  All units required are within range and the path is 

clear of obstacles and interference. Shorten the 

distance if necessary.

Transmission collision

Signals from other household devices, such 

as door bells, home security systems and 

entry controls, may interfere with those of this 

product and cause temporarily reception failure. 

This is normal and does not affect the general 

performance of the product. The transmission 

and reception of temperature readings will resume 

once the interference recedes.

Other malfunctions

If there is no response from the wall clock by 

keystrokes or if any other malfunctions occur 

perform the following steps.

   NOTE!

With this procedure all received data will be deleted.
1.  

Press RESET button (10) with a pointed 

instrument (e.g. pen).

2.  The clock hands will move to their start position 

(12:00 a.m.) and the wall clock then tries to 

receive the signal.

3.  Wait approx. 2-5 minutes until the current time 

will be displayed.

CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the 

power supply (remove batteries)!
Only use a dry cloth to clean the exterior of the 

device. To avoid damaging the electronics, do not 

use any cleaning fluid.
Protect the device from dust and moisture. The 

batteries should be removed from the unit if it has 

not been used for a long time.

ENTSORGUNG

Dispose of the packaging materials properly, 

according to their type, such as paper or 

cardboard. Contact your local waste-disposal 

service or environmental authority for information 

on the proper disposal.

Do not dispose of electronic devices in the 

household garbage!

As per Directive 2002/96/EC of the European 

Parliament on waste electrical and electronic 

equipment and its adaptation into German 

law, used electronic devices must be collected 

separately and recycled in an environmentally 

friendly manner.

EC DECLARATION OF CONFORMITY

Bresser GmbH declares that the device 

(MyTime iO Wall Clock / Art.No.: 80-20210) 

is in accordance with applicable guidelines and 

corresponding standards of the 2014/53/EU 

directive. Find the complete declaration under:

www.bresser.de/download/8020211000000/

CE/8020211000000_CE.pdf

Summary of Contents for 8020211B4K000





















Reviews: