BREN 700-Series User Manual
Installation
2
-
15
2.
7
Cable Connection
The cutting plotter communicates with a computer through a
USB (Universal Serial Bus)
,
a
Serial port
(RS-232C)
or
Ethernet
. This chapter shows you how to connect the cutting plotter
to a host computer and how to set up the computer/cutting plotter interconnection.
!!
Notice:
When USB connection is enabled, serial port will be disabled automatically.
2.
7
.1 USB Interface
BREN 700-Series Razor
build-in USB interface are based on the Universal Serial Bus
Specifications Revision 2.0 (Full Speed).
2.
7
.
2
Connecting your
BREN 700-Series Razor
cutter
1.
Turn on the machine.
2.
Connect the USB connector to the machine and the
n start the BREN driver installation
process.
WINDOWS WILL DETECT USB AUTOMATICALLY BUT
CUTTER WILL NOT BE ABLE TO BE USED UNTIL
DRIVER IS INSTALLED CORRECTLY!!!
Figure 2-25
Serial Interface Connector (RS232C) –
used to connect the cutting plotter to a
computer through a serial interface cable.
USB Connector
–
used to connect the cutting
plotter to a computer through a USB cable.
Ethernet Connector– used to connect your
computer to a local area network.
