BREN 700-Series User Manual
4. Right-click again on the BREN Pro printer icon and select Printing Preferences. The
items you set here (Setup tab) will become the "default" settings in your cutting application.
You can specify a starting page size (i.e. 5" w x 10" l), unit of measure (change to inches),
resolution (change to high), and media handling method (Feed Cut Extent Only). This will
establish the initial page settings for your BREN 700-Series Razor. You can change the
settings as needed, per job, once you are in any application you are using to send a cut
job to your BREN cutter.
Note:
Refer to your Operation Manual for more information on printing preferences. If the
default setting changes you made do not appear when you open an application to use with
your BREN cutter your computer is more than likely set up with Administrator Control. You
will need to contact your Computer Administrator to change the default settings
Installation
2
-
28
